*** WELCOME *** Computer and Office Accesoriess *** SIGMA SUMBER UTAMA *** Toko Sigma *** Jln. K.H. Syahdan No 40a-b, JAKARTA BARAT - INDONESIA *** 0896 5310 9020 ***
A A A

NOYAFA NF-9505 PRECISION FIBER CLEAVER - CUTTER PEMOTONG FIBER OPTIC

New Upload|Networking » Crimping Tool

  • NOYAFA NF-9505 PRECISION FIBER CLEAVER - CUTTER PEMOTONG FIBER OPTIC
    NOYAFA NF-9505 PRECISION FIBER CLEAVER - CUTTER PEMOTONG FIBER OPTIC
Harga :Rp850.000
READY STOCK


Jual : NOYAFA NF-9505 PRECISION FIBER CLEAVER - CUTTER PEMOTONG FIBER OPTIC

NOYAFA NF-9505 optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers.
It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.

High energy uses fine-grained tungsten steel as raw material, which has high hardness, wear resistance and toughness.

Automatic return. After the cover is closed, push it in and cut off the fiber, and the upper cover will open the slide rail and return automatically.

New three-in-one fixture
The newly designed leather, pigtail, and bare fiber three-in-one, all three slots are effective, the three-slot truly full-tooth metal cap assembly, and the small cover automatically positions without falling.


Features :

  • Cold connection tool, single-mode or multimode use.
  • High precision cleaves, 250um coated or 900um buffer fiber.
  • Contained 12 position tungsten steel blade, life time up to 40000 cleaves.
  • Large & small adjustable knife
  • Easy to operate.
  • Compact body & light weight.
  • Made in Taiwan
  • Split hammer design Integrated design to improve accuracy
  • Stable base The bottom is convenient for tool storage


Spec :

  • Brand : Noyafa
  • Model Number: NF-9505
  • Bare fiber diameter : 0.25mm~0.9mm
  • Out coat diameter : 1.25mm
  • Cutting angle : 0.5
  • Blade Life : 40.000 times
  • Fiber Core : Single
  • Material : stainless steel
  • Cleaving Length :
    250um: 9~16mm,
    900um: 10~16mm

  • Size : 59 59 49 (mm)
  • Weight: 300 g


===

Under normal conditions, the blade height has been verified before leaving the factory, no adjustment is needed.

Once an ab- normality occurs, first clean the rubber surface of the fiber pres- sure seat and the blade edge portion with a cotton swab to elimi- nate the cutting failure caused by dirt.

The performance of the blade position is low:
the fiber is cut continuously, has unevenness, broken core, and oblique angle.

The performance of the blade position is high: the fiber is cracked; the end face is shaded; the angle is large.

Check if the blade guide is adjusted: Place a piece of 20mm bare fiber on the stainless steel rubber pad and push the knife holder so that the tip of the blade is just slight- ly twisted to the fiber.

===

isi paket :

1 x Fiber Optic Cleaver NF-9505
1 x Plastic Box
1 x Instructions
1 x Ruler guide
1 x Kunci L


Berat sebelum di bungkus menjadi paket : 400 gram


Gambar Barang, Spesifikasi Barang, Ketersediaan Barang dan Harga Jual Barang bisa berubah sewaktu-waktu tanpa pemberitahuan.

note :

All Registered trademarks or logos of brand and product names are the exclusive property of their respective owners / holders.















Jual : NOYAFA NF-9505 PRECISION FIBER CLEAVER - CUTTER PEMOTONG FIBER OPTIC